QC Painting & Insulation Inspector
Added 13 Oct · still live
Possible
Sponsorship likelihood
This job is eligible only on a shortage list. Ineligible if it's SOC 8143
Not disclosed
Salary
Not disclosed by employer
£41,700
Going rate
Skilled Worker going rate
This role may qualify for a Skilled Worker visa
SOC 3115 is an eligible occupation, but we are only 52% sure that is the right code. Technip Energies is a licensed sponsor, so if the code fits, the role should qualify. Check the occupation eligibility rules against what the job actually involves.
We pick the code from the advert's text, so it is our best guess, not the employer's. Each code it could be has its own likelihood:
- Possible 3115 (Quality assurance technicians) · 52% match
- Ineligible 8143 (Routine inspectors and testers) · 34% match
- Ineligible 3581 (Inspectors of standards and regulations) · 6% match
Ask Technip Energies what the duties are.
Your salary route
New graduate or PhD holder? Pick one of the lower rates.
What each route needs for this job
| Occupation code | New entrant 70% of going rate | STEM PhD 80% of going rate | Relevant PhD 90% of going rate | Standard rate 100% of going rate |
|---|---|---|---|---|
3115 Quality assurance technicians Most likely code | £33,400 | £33,400 | £37,500 | £41,700 |
8143 Routine inspectors and testers Also possible | £33,400 | £41,700 | £41,700 | £41,700 |
3581 Inspectors of standards and regulations Also possible | £33,400 | £41,700 | £41,700 | £41,700 |
We use the lowest threshold across the plausible codes. Likelihood is Possible at most when the pay clears only a lower rate, or only under a less likely code. How the Home Office picks the code
About the role
Job Description
About the Project
Technip Energies is delivering major engineering, procurement and construction activities on the Net Zero Teesside Power project, one of the UK's first gas-fired power stations with integrated carbon capture technology. The project represents a significant step in supporting the UK's decarbonisation ambitions and will require the highest standards of quality assurance and quality control throughout construction and commissioning.
Position Summary
Technip Energies is seeking an experienced QC Painting & Insulation Inspector to support construction activities on the Net Zero Teesside Power project. The successful candidate will be responsible for ensuring that all painting, coating, fireproofing and insulation works are executed in accordance with project specifications, approved procedures, international standards and client requirements.
The role will involve conducting inspections, witnessing testing activities, verifying contractor compliance and maintaining quality records to ensure that all protective coating and insulation systems are installed to the highest standards of safety, quality and durability.
Key Responsibilities
Quality Inspection & Surveillance
Perform day-to-day inspection and surveillance of painting, coating, insulation and passive fire protection works, Visual checks, Blast grade checks, DFT, WFT, Thickness checks
About the Project
Technip Energies is delivering major engineering, procurement and construction activities on the Net Zero Teesside Power project, one of the UK's first gas-fired power stations with integrated carbon capture technology. The project represents a significant step in supporting the UK's decarbonisation ambitions and will require the highest standards of quality assurance and quality control throughout construction and commissioning.
Position Summary
Technip Energies is seeking an experienced QC Painting & Insulation Inspector to support construction activities on the Net Zero Teesside Power project. The successful candidate will be responsible for ensuring that all painting, coating, fireproofing and insulation works are executed in accordance with project specifications, approved procedures, international standards and client requirements.
The role will involve conducting inspections, witnessing testing activities, verifying contractor compliance and maintaining quality records to ensure that all protective coating and insulation systems are installed to the highest standards of safety, quality and durability.
Key Responsibilities
Quality Inspection & Surveillance
Perform day-to-day inspection and surveillance of painting, coating, insulation and passive fire protection works, Visual checks, Blast grade checks, DFT, WFT, Thickness checks
- Verify that surface preparation, coating application and insulation installation activities are performed in accordance with approved Inspection & Test Plans (ITPs), method statements and project specifications.
- Support the coordination of and conduct inspections at defined hold points and witness points, Review / Approval of Inspection Test Records.
- Ensure compliance with relevant project quality requirements and acceptance criteria.
Advertisement
- Inspect abrasive blasting and surface preparation activities.
- Verify surface cleanliness, profile measurements and environmental conditions prior to coating application.
- Conduct wet film thickness (WFT) and dry film thickness (DFT) inspections.
- Perform visual inspections for coating defects including:
- Pinholes
- Runs and sags
- Orange peel
- Cracking
- Blistering
- Delamination
- Witness coating adhesion and holiday testing activities where required.
- Review material certifications and verify approved coating systems are correctly applied.
- Inspect thermal, acoustic and cryogenic insulation installations.
- Verify insulation materials conform to approved specifications and material certifications.
- Inspect insulation cladding, weatherproofing systems and sealing arrangements.
- Review installation of passive fire protection systems and fireproofing materials where applicable.
- Confirm insulation systems are installed to minimise corrosion under insulation (CUI) risks.
- Maintain accurate inspection records and quality dossiers.
- Prepare inspection reports, punch lists and non-conformance reports (NCRs) as required.
- Participate in quality walkdowns and system handovers.
- Review contractor quality documentation and inspection records.
- Assist in compilation of turnover and completion dossiers.
- Support implementation of the project QA/QC programme.
- Participate in quality meetings and audits.
Advertisement
- HNC/HND or equivalent qualification in Engineering, Materials, Mechanical, Industrial or Construction disciplines.
- Recognised coating inspection certification such as:
- NACE Coating Inspector Level 2 or above; or
- FROSIO Inspector Level III; or
- ICorr Level 2Coating Inspector.
- CSCS Card (or equivalent site access certification).
- Valid UK work authorisation.
- Extensive experience in QA/QC inspection within:
- Power generation
- Oil & Gas
- Petrochemical
- Energy transition projects
- Major EPC construction projects
- Demonstrable experience inspecting:
- Industrial protective coatings
- Thermal insulation systems
- Passive fire protection systems
- Structural steel coatings
- Piping insulation systems
- Experience working with multinational EPC contractors and subcontractors.
- Previous experience on large-scale industrial construction projects is highly desirable.
Working knowledge of:
- ISO 12944
- SSPC / AMPP coating standards
- NACE inspection practices
- BS and EN coating standards
- Surface preparation standards (ISO 8501 series)
- Thermal insulation installation practices
- Corrosion Under Insulation (CUI) prevention
- Passive Fire Protection (PFP) systems
- Quality Management Systems (ISO 9001)
- Dry Film Thickness (DFT) gauges
- Surface profile measuring equipment
- Strong attention to detail and commitment to quality.
- Excellent observation and reporting skills.
- Ability to work independently in a fast-paced construction environment.
- Effective stakeholder management and communication skills.
- Strong problem-solving and decision-making capability.
- Safety-focused mindset with a commitment to project delivery excellence.
- Opportunity to contribute to one of the UK's flagship carbon capture and decarbonisation projects.
- Collaborative and multicultural project environment.
- Professional development and career progression opportunities.
- Competitive salary and benefits package.
- Exposure to cutting-edge energy transition technologies.
#bepartofthesolution
This description is the source posting as it read when we added it. We are not affiliated with Technip Energies, so check their own site for the current details.
Where this offer sits in the market
Quality assurance technicians (SOC 3115) · UK · ONS ASHE 2025 · basic pay · ~43k in sampleSOC 3115
- Middle half £28,444–41,340
- Median £32,968
- Going rate £41,700
- Threshold £41,700
Similar sponsored roles
See all UK visa jobsNo close matches live right now.
Browse more sponsored jobs at Technip EnergiesAbout sponsorship for this role
Does this job guarantee visa sponsorship?
Not necessarily. Technip Energies holds a sponsor licence, but sponsorship for a specific hire is always the employer's decision. Be upfront in your application that you'll require it.
What salary is needed for this role to be eligible?
The offer must clear both the general threshold and the SOC 3115 going rate of £41,700. New-entrant and shortage discounts can lower it.